Onshore and offshore facilities

In learning about oil and gas, we must often hear the terms onshore and offshore. So, what do these two terms mean? Let’s discuss!

Onshore is work on land to shoreline areas for oil and gas exploration and exploitation activities. Examples of onshore work are onshore refineries and boreholes.

While offshore means work that is far from land or at sea. Offshore is an oil and gas exploration and exploitation activity carried out offshore or far from land. In offshore activities, exploration and exploitation are carried out using a platform structure installed in the middle of the ocean to support the equipment.

Onshore

examples of onshore activities

Onshore production can produce more than a few tens of barrels a day. Oil and gas are produced from several million wells worldwide. For the smallest reservoirs, petroleum is collected in holding tanks and collected in tanker trucks or railcars for processing in oil refineries.

Onshore wells in oil-rich areas also have high-capacity wells producing thousands of barrels per day, connected to 1,000,000 barrels per day oil separation plants. Products are shipped from the factory by pipelines or tankers. Oil and gas production comes from many different licensees.

Recently, crude oil, tar sands and oil shale have been extracted with the latest technology and lower prices. In the extraction process, crude oil needs heating and diluent to be extracted, tar sand is extracted using steam. Oil reserves in unconventional reservoirs contain more than twice the hydrocarbons found in conventional reservoirs.

Offshore

examples of offshore activities

The installation of offshore structures depends on the size and depth of the water. Some types of offshore structures that are often used are:

Shallow water complex. This structure is characterized by several independent platforms with various parts of the process and equipment connected by small bridges.

Gravity Base. A very large concrete structure is placed at the bottom. This structure accommodates all parts of the process and a large number of equipment. The structure is formed using cast concrete that is worked on the beach. Then, the structure is filled with sufficient air so that the structure floats in the sea and is carried to the middle of the sea and then planted to the seabed.

Compliant towers. Very similar to gravity base. It’s just that the shape is smaller like a narrow tower. The tower is flexible. This flexibility allows it to operate in much deeper water as it can ‘absorb’ much of the pressure exerted on it by wind and sea. The tower is used in water depths of 500 to 1000 meters.

Floating production. This structure is a structure that floats on the surface of the sea. Three examples that are often used are Floating Production, Storage and Offloading (FPSO), Tension Leg Platform (TLP) and SPAR.

FPSO is an offshore platform using large ships. The ship can rotate freely around following the direction of the wind, waves or currents. The process is placed on the ship’s deck, while the hull is used for storage and discharge of goods to the dock. It can also be used with pipeline transportation. FPSO operates at sea level at a depth of 200 -2000 meters.

The TLP consists of structures held in place by vertical tendons connected to the seabed. The structure is held in place by tensioned tendons that support the use of TLP in wide waters of depths ranging up to 2000m. The tendons are constructed with hollow high tensile strength steel tubing which brings spare buoyancy to the structure and ensures limited vertical movement.

The SPAR consists of one large tall cylinder that supports the deck (process site). However, the cylinder cannot cover the entire deck, instead it is added support material with a series of cables and beams. The large cylinder serves to stabilize the platform in the water and absorb the potential force of the storm. SPAR is used at water depths from 300 and up to 3000 meters. SPAR is not an acronym, but refers to its resemblance to a spar ship. SPARs can support dry wells, but are more commonly used in subsea wells.

Subsea production systems. Wells located on the seabed, not at sea level. Like floating production systems, petroleum is extracted on the seabed, and then it can be connected to existing production platforms or even land facilities. The wells are drilled by mobile rigs and the extracted oil and gas is transported by subsea pipelines and sent to processing facilities. Underwater systems are typically used at depths of 7,000 feet or more and have no drilling capability, only for extracting and transporting. Drilling and processing is carried out from the surface.

Contributor: Daris Arsyada

By Caesar Wiratama

References:

Devold, Havard. 2006. Oil and Gas Production Handbook: An Introduction to Oil and Gas Production. Oslo: ABB ATPA Oil and Gas.

https://pwypindonesia.org/id/mengenal-skema-onshore-dan-offshore-dalam-industri-hulu-migas/#:~:text=Onshore%2C%20diterjemahkan%20dari%20Bahasa%20Inggris,eksploitasi%20minyak%20dan%20gas%20bumi. 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *