How to Use This materialSelectionFilter Module:

Select Axes:

• • Choose the properties for the X-axis and Y-axis (e.g., Density, Young’s Modulus) from the dropdowns.
  • Select the scale (Linear or Logarithmic) for each axis.

Set Design Limits:

• • • You can learn how to make the equations in the above “>>” button, or watch the tutorial video.
    • Enter minimum and maximum values for the design limits on both the X-axis and Y-axis. These limits will be shown as dashed lines on the plot.
    • If you have design equation, you can input it in these formats:
      • multiplication: x * 2
      • power: x ** 2
      • trigonimetry: Math.sin(x)
      • exponential: Math.exp(x)
      • logaritmic: Math.log(x)

Plot the Materials:

• • Click the “Plot” button to generate a scatter plot of materials with the chosen axes and scales. The plot displays each material’s properties as colored circles.

Manage Materials:

• • To add a new material, click “Add Material” and fill in its properties in the table.
  • To remove a material, click the “Remove” button next to the material in the table.

Edit Material Properties:

• • Use the table to enter or modify each material’s minimum and maximum values for properties like Density, Young’s Modulus, Yield Strength, etc.

Save and Open Materials

• • You can save and open your edited materials data or your custom materials. If you refresh or close the page, the data will be reset.

The plot dynamically updates each time you add, edit, or remove materials, allowing you to compare their properties visually based on your selected parameters.